河北巨弘建筑工程有限公司

预制化粪池模具包括池体和位于池体上的进污口和出水口,预制化粪池模具内部设有将池体分隔开的隔板,隔板上设有通孔.预制化粪池模具呈圆筒状,其上部设有检查口.相对于普通的池子结构更强,承压力也更强.可以实现多个仓分阶段处理。化粪池主要用于厂矿，小区排污，净化生活污水环保的作用，减轻了城市排水工程的压力，模具采用一体预制成化粪池钢模具是新型的水泥制品钢模具。化粪池模具主要是用来处理污水的池子,为了发生危险须在上面盖上,处理污水使用效果较好的是化粪池模具。在安装过程中对填土无无特殊要求,还可以滚动运输和安装,大大简化了操作程序水泥化粪池模具不仅是去除生活污水中悬浮性有机物的处理设施,并且对于污水进入化粪池中所沉淀下来的污泥进行一次长时间的厌氧消化,降低污泥的含水率。

The prefabricated septic tank mold consists of the pool body and the water inlet and outlet on the tank body. The precast septic tank mold is provided with a partition board separated by the pool body, and the diaphragm is provided with a hole. The prefabricated septic tank mold is cylindrical, and the upper part is equipped with a check mouth. Stage processing. The septic tank is mainly used in the factory and mine, the sewage discharge in the district and the environmental protection of the living sewage, reducing the pressure of the urban drainage engineering. The mold is a new type of cement product steel die by using the prefabricated septic tank steel mold. Septic tank mold is mainly used to deal with the sewage pond. In order to have danger, it must be covered on the top. The sewage disposal effect is better than septic tank mold. In the process of installation, there is no special requirement for the filling, and it can also be rolled and installed, which greatly simplifies the operation procedure of the septic tank mold not only to remove the suspended organic matter in the sewage, but also to a long time anaerobic digestion of the sludge precipitated from the sewage into the septic tank and reduce the sludge. The water content.